After changing the language, the PC should be restarted or the user should be logged off from time to time so that all applications adopt the new language. If you reduce the average character length, you can configure more OPC S7 symbols.
To assign rights, set the OPC item-specific rights using the S7 symbols on the same properties page. Indexing for faster searching can lead to communications problems If, for example, in Windows 7, the indexing of the PC files is enabled, and if traces were created in the indexed area, the high processing load can disrupt communication recognizable, for example, by loss of connections to partner devices.
In this case disable indexing of these folders or the indexing on the entire PC. Configurations of compatible modules can be downloaded to modules installed in the PC. The following overview shows the combinations available. XDB import when more than one compatible CP is inserted in the computer.
Here, the interface of the CP to be configured should be entered in the input boxes of the interface parameter assignment being used so that several CPs of the same type can be assigned.
COML S7 is used for the fast configuration of modules. The configuration is assigned to one module or more specifically one module name. If the module is removed from the PC, the configuration is lost. If you want to replace one module with another, follow these steps: 1. Replace the module. Configure the Windows 7 the taskbar to do this. In Windows 7,. NET-Framework 3. The expansions of.
NET-Framework V2. For information on configuring, refer to the STEP 7 documentation. You can attach the programming device at any point in the network and establish an online connection to all stations accessible via gateways.
As of Version V6. Operating Systems 32 bit. Professional, Ultimate or Enterprise. Restrictions for the server variants: Terminal server services are not released for all modules or software products. For further information, refer to the chapters on the individual products. Of the Chinese language versions, only the language version "Simplified Chinese" is supported, however not in the Multilanguage versions of Windows.
The multilanguage version is released for the languages German and English; the other languages were not tested. This affects the activation ID, in other words, after several changes, it becomes necessary to reactivate the license.
After uninstalling the products, you can then upgrade to the new Windows version. Computers with multiple selectable operating systems are not permitted.
Instead, the Hardware Manager or its Wizard for new hardware appears. Choose "No, not this time" and then click the buttons "Next" and "Next" again and then "Finish". In this case, please follow the steps outlined below to clear the message.
If it exists, delete the following key in the registry:. The configuration data is not retained. In a Windows domain, a domain administrator can make local settings on workstations that are adopted when the workstation logs on with the domain and overwrite the existing local settings. As of Windows Vista, the firewall allows the configuration of outgoing connections. In the default setting, outgoing connections are allowed in Windows Vista.
The Windows Defender regularly checks the system for malware. If the PC is used in a secure, protected environment, the Windows Defender should therefore be disabled. The limitation of resources can lead to non-functioning of industrial communication. Supports the administrator in management of remote nodes. Network access protection allows the configuration of access conditions but this has not yet been tested and released for industrial networks.
Windows is not a real-time operating system. Real-time requirements cannot therefore be met. As a result, it is possible that when starting programs or reading files, your application is not executed for several ms. The points below will help you to optimize your system and to achieve reaction times approaching those of a real-time system:. If there is a high network load due to parallel communication, for example copying files, a temporary station failure followed by return of the station can occur.
Possible conflicts due to connecting several terminals have been eliminated. For a terminal user, this means:. Further important aspects of using terminal services. The terminal client may not shut down a terminal server that handles industrial communication. Once the installation is successfully completed, the server continues in the user mode again after you restart.
You will find wide-ranging help on the terminal services in the help system of the Microsoft Windows Server. Programs started from a remote terminal client can hang for several seconds. If you start an application on a terminal server from a remote terminal client, this may hang for several seconds if the connection between the terminal client and terminal server is disrupted or the terminal client computer changes to the sleep mode.
Configuration with the Station Configuration Editor and other services with remote desktop or terminal services. Configuring modules with several sessions running at the same time causes problems because this can result in inconsistent statuses. For this reason, configuration with more than one open service is blocked at critical points. This may mean that boxes that can normally be edited are grayed out if terminal services are operating.
Before you can edit in this situation, the terminal services must be disabled. The reason for this is that VM Ware "bridges" the entered network adapters of the host to the guest mode. Note on CP If the module is not correctly recognized in the virtual environment, it can be assigned to the guest with "Disconnect Connect to Host " and repeated "Connect Disconnect from Host ".
In this case the configuration must be reloaded. Note on license keys: If license keys are stored on virtual data media, they can easily be lost.
As a result, no replacement can be supplied if they are lost. To help with troubleshooting, there is an OPC trace that can be activated in the Configuration Console. At the left-hand edge of the navigation window you can select the module whose trace you want to activate. Trace Settings: depending on the module, you can see where and which functionality will be traced. View Trace File: if you open this window, the current trace entries are displayed directly in the open window.
The updating of this window if several are open, further tabs are displayed requires time to process and the windows should only be displayed if you want to trace an error online. Activated traces are indicated by a red exclamation point in the left navigation menu. Contents 1. DP 3. S 4. FMS 5. The CP communications processor 6. The CP communications processor 8. CP A2 communications processor CP communications processor S TF General requirements, notes, and restrictions Information, restrictions and notes relating to OPC Notes on license keys Requirements and restrictions relating to hardware in general Compatibility Notes on C programming interfaces Notes on project engineering, configuration and NCM Development environments and compilers supported Routing Operating systems 32 bit Trace 1.
Interface parameter setting "Auto" Operation of the CP with the "Auto" interface parameter setting has not been released. Configuration limits and performance data of the modules You will find the configuration limits and performance data of the modules on the Siemens Web pages as FAQs under entry ID DP Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Further restrictions For information on the following topics, refer to Section 1. S Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Further information For information on the following topics, refer to Section 1. Information on configuration If connection establishment of a fully configured connection is started by a station that has a different station address from the configured station, the connection between the two partners will be established despite the difference.
Further information For more detailed information, refer to Section 1. Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Restrictions configuring S7 connections All communications modules of a PC must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work. Cause: The CP was removed in configured mode and then reinserted not permitted! Further information on configuration If connection establishment of a fully configured connection is started by a station that has a different station address from the configured station, the connection between the two partners will be established despite the difference.
Message "CP is no longer detected" For information on the problem "CP is no longer detected", refer to Section 6. CP A2 communications processor Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Follow the steps below: 1. Time-of-day frames When configuring the time intervals with STEP 7, only intervals of 1 s or 10 s are possible. CP A2 is displayed in the device manager as "Ethernet Controller" Select the relevant module and uninstall it.
Driver signature is not recognized Sporadically, the signature of the CP driver is not recognized. Passive connection establishment with the CP A2 If connections are established to the CP A2, the connection establishment timeout should not be set too low for example with 64 connections, higher than ms. Using the firmware trace with more than one module When you enable the firmware trace, check that the name of the trace file is different for each CP A2.
CP communications processor Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
How 4-path redundancy functions If you have configured your fault-tolerant S7 connection with maximum CP redundancy 4 paths , if the productive or reserve path fails, another connection path will be established assuming it is available. The connection is then redundant again over a new path. Online help Click on the?
Software diagnostic interface It is also possible to read diagnostic data from your own user program. The CP and CP A2 communications processor Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
SOFTNET PN IO Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Deactivating Ethernet network cards Ethernet network cards must not be deactivated. Data records This version supports reading of data records only up to a length of bytes. SOFTNET-S7 for Industrial Ethernet Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Restrictions configuring S7 connections All communications modules must always be connected to a network in the STEP 7 project, otherwise even the S7 connections of a connected communications module do not work. Loss of connections If the number of input buffers of the used CP is less than the number of packets that come from the network, connections may abort.
High number of connections with long frames If you have a high number of connections for example more than 32 and the PDU length is greater than bytes, you should disable fast acknowledge otherwise there may be a frame overload. Parameters Value Retransmission Time for data transfer ms or higher Retransmission max. STEP 7 to V5. The "Configuration Console" program does not detect installation removal in isolated cases In isolated cases, it is possible that the "Configuration Console" program does not recognize the installation or removal of a module.
SOFTNET-S7 Lean for Industrial Ethernet Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
SOFTNET-PG for Industrial Ethernet Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
SNMP OPC Server Please make sure that you read the following sections in this document: Section 23, " General requirements, notes, and restrictions " Section 24, " Information, restrictions and notes relating to OPC " Section 25, " Notes on license keys " Section 26, " Requirements and restrictions relating to hardware in general " Section 28, " Notes on C programming interfaces " Section 29, " Notes on project engineering, configuration and NCM " Section 32, " Operating systems 32 bit " You only need to read the other sections if they relate directly to your product.
Select the SNMP device timeout significantly higher than the update rate and the update rate significantly higher than the cycle time Where possible, select a timeout value default ms that is higher than the update rate for example ms by a factor of 10 on the OPC client.
The only characters allowed are a-z , A-Z , and -. Following a driver update always reboot. Error message while installing over an existing installation If you install over an existing installation, the following message may be displayed by the service control manager: "At least one service or driver failed during system startup.
Installing and removing modules in the Device Manager When you remove a module from the PC, the operating system usually asks you whether or not you also want to remove the driver. Adopting security settings for other firewall manually If you use a firewall from another vendor instead of the firewall from Microsoft, the security settings from the "Configuration Console" are not adopted. OPC Automation interface is not released for multi-thread user programs The OPC Automation interface cannot ensure data consistency if there is simultaneous access by several threads.
Polling time restriction in DP slave operation of the CP A2 and CP If you use consecutive calls for synchronous reading from the device or synchronous writing to device over OPC with DP-V1 protocols, make sure that this does not occur faster than the standard polling time. Symbol File Configurator: User interface inoperable during time-intensive activities During activities such as CSV import, CSV export and saving files with an extensive content, there may be long waiting times.
Symbols in the root directory of the symbol file with V6. Memory requirements of the OPC server When using configurations approaching the configuration limits, make sure that the OPC server has adequate free memory for managing data. OPC Data Access 3. Avoid other OPC calls in the OPC callback routines Function calls with longer execution times should be avoided to prevent other callbacks from being delayed.
Changing languages in ongoing operation An OPC Alarms and Events application cannot make a language change as long as it still has active subscriptions. OPC Scout V Long wait times with slow response by the OPC server With slow responses by the OPC server, for example, when the connection is interrupted or when browsing a namespace with tens of thousands of items per level or with multiple reads of value attributes that have no connection to the device, you will have to expect correspondingly long wait times on the operator interface.
Non-existent but configured symbol file prevents connection to the OPC server A non-existent symbol file that is entered in the configuration prevents the connection being established to the OPC server.
COML S7 - no synchronization with existing local addresses during import When importing a COML S7 configuration, the remote S7 partner addresses it contains are not checked to establish whether or not they are the same as local addresses on the PC station.
The following example illustrates the problem: The table shows 5 alarms that were configured with different source and area information in German and English. Ventil valve Alarm4 If the configured texts are evaluated in a different order, the following hierarchy B could also result. Alarm2 Ventil valve Alarm3 Kraftstoff engine The corresponding term engine from Alarm4 is already being used for Kraftstoff.
Ventil valve Alarm4 To avoid inconsistencies being resolved unexpectedly as shown above, there must be a 1 to 1 match between the terms in the different languages at each hierarchy level in the configuration. S7 OPC UA server with large number of alarms and conditions available only 50 s or longer following download If you make use of the full released number of S7 alarms in German and other S7 alarms in English, and consequently with many alarms and conditions, the S7 OPC UA server will only be available after approximately 50 s or longer.
Improved performance with group calls when reading and writing If you use group calls instead of individual calls one after the other when reading and writing OPC items, it is possible to improve throughput considerably since the OPC server can often achieve an internal optimization.
Updating RCWs in. Configured default priority per EventID for alarms before configured priority in instance data block before alarm block message severity before generally configured default priority With the OPC Alarms and Events server "OPC. Note the following: The configurable default priority for alarms per EventID overrides the S7 priority configured in the instance data block as of OPC servers 8. Extended range of values for quality The range of values for the quality of an item has been extended.
New error codes if "Immediate response when interrupted connection is detected" is configured For the S7 protocol, the additional error codes 0xL and 0xL have been introduced with the meaning "no connection to the S7 communication partner, immediate error return configured". ToUniversalTime A change in the configuration may require a restart on the computer If components involved in a configuration change are still being used, it is possible that the Station configuration Editor reports the still active components and proposes a computer restart.
Possible language mixtures on the OPC interface Remember that a mixture of languages can occur on the OPC interface when the operating system language and installation language differ from the language requested on the OPC interface "localeID". Writing on a German system with an English "localeID". Close OPC clients before making project engineering and configuration changes Prior to making any project engineering or configuration changes, please close your OPC clients.
If you have a large configuration, select a higher job timeout With a large configuration approximately 10, items not only the communication delay on the network but also the processing time for OPC jobs on the OPC servers becomes relevant. Asynchronous OPC jobs not executed deterministically Depending on the available operating system resources and delay time on the network and on the partner device, multiple consecutive asynchronous OPC jobs are executed almost simultaneously.
Write-protected symbol files cannot be used STI and SSD symbol files cannot be used if the "write-protected" attribute is set. Make sure that the "interactive" or "configured" users have "full access" to these files and folders: OPC DA 3. If the IO device is unobtainable, the method call can take a long time. Symbol files with prefix simplify the name resolution For OPC symbols, it is possible to use several symbol files that differ from each other in the prefix.
Differences between written and read values in DPC2 data records A written value of an OPC DPC2 data record item cannot be read out identically using the same item or an item with the same address, slot and index. Access permissions for symbolic items The access permissions for symbols can be selected freely. OPC: Procedure for avoiding connection aborts As a general rule, all configuration parameters, in particular timeout times, cycle time, alarms, must be matched up with each other depending on the plant configuration hardware and software , the configuration limits and the way the client and other active applications work.
Self-issued OPC UA certificates are indicated as not trustworthy OPC UA certificates are not indicated as trustworthy by the Windows certificate management if they were self-issued and not stored in the trustworthy storage folder.
Net are 1. UA certificate management: first delete previous certificate before a new certificate can be accepted from the same client If a remote UA client certificate has already been accepted in the UA certificate management in "Configuration Console", no further certificate can be accepted from the same client and domain. Uninstalling license keys You can uninstall license keys at any time with the "Automation License Manager" program.
Autostart Do not start an S7 application using the Windows Autostart program group, Instead, use the Autostart functions of the "Configuration Console" tool to launch PC user programs following startup.
Downloading or importing does not work Before downloading or importing configuration data, the "S7 Connection Diagnostics" program must be exited. Dealing with problems when downloading or importing Before downloading or importing configuration data, the "S7 Connection Diagnostics" program must be exited.
Downloading or importing an XDB file of configurations with several hundred connections takes several minutes Downloading or importing an XDB file of configurations with several hundred connections can take several minutes. S7 symbol names with period. Diagnostic buffer entries when a download fails In some situations, it is possible that a component rejects downloaded project engineering data. Assignment of the CPs to the real hardware in the Station configuration Editor Following any change to the configuration during station import etc.
To archive, follow the steps outlined below: 1. Install "WinZip" 2. To extract, follow the steps outlined below: 1. Double-click on the archive 2. Gold Expert. Share this page:. Share this page on Presales info. Follow us on Twitter Youtube. Rate 0. I cannot see the plc tag values - instead I see only hash symbols " ". Dear Experts 1- I want to know about the complete procedure step by step of uploading plc project and program etc from plc to my pg.
Muhammad Munir Electronics Engineer. Suggestion To thank Quote Answer. Rate 1. Hello ; With this type of question, I can only really suggest you take a few minutes and study the Programming with Step 7, v. Chapter 24 presents printing and archiving with Step 7. There is also the online help of Step 7 that can be immensely helpful for information on the different options in the Step 7 editors. Hope this helps, Daniel Chartier. Mothilal Posts: Rating: Should we create a new project with actual hardware configuration?
Note: I studied that manual.. But Iam expectingclear proceedure.. Thanks Regards Mothilal. Rate 4. In the next screen, fill in the slot the CPU is in this is always 2 for S and the node address of the communication port on the CPU. After clicking OK, the whole contents of the PLC including all blocks and hardware configuration will be uploaded into a new station in the project.
While this project contains no documentation, it can be used as a backup to download later if needed. Checking Communications With the programming cable plugged in, you can check for proper operation by clicking on the Accessible Nodes icon. If communication fails then you will receive a message like below. If this doesn't work then I don't know what to tell you.
Downloading First, in order to enable the download menu commands, you must select the Block folder in the project's station you wish to download. There are three methods of downloading. Partial download of selected blocks Full download of all blocks and system data Complete deletion of online PLC blocks and then downloading of all blocks and system data Partial Download Partial downloads are used in existing projects where only one or more blocks will be downloaded.
Clicking Yes will automatically put the CPU back into run mode. Clearing the CPU Memory and then Downloading The partial and full download methods above will overwrite existing blocks but will not any blocks from memory.
After this, follow the normal download procedure. Uploading There are two methods for uploading. This is the same as the Online button on the icon bar.
0コメント